GE universal remote codes for Haier TV and setup guide

Are you struggling to find the right remote code for your Haier TV when using a GE universal remote? 

Look no further! In this comprehensive blog post, we will provide you with a list of GE universal remote codes specifically designed for Haier TVs, allowing you to program your remote and take control of your TV’s functions. 

Additionally, we’ll guide you through the setup process, whether you have the codes at hand or need to use the convenient auto code search method. 

Say goodbye to juggling multiple remotes and simplify your TV viewing experience with the GE universal remote control. Let’s dive in and unlock the full potential of your Haier TV!

What are GE universal remote codes for a Haier TV?

GE universal remote codes for a Haier TV are a series of numeric values that correspond to specific commands and functions on the Haier TV. 

These codes allow you to program a GE universal remote to control various features of your Haier TV, including power on/off, volume adjustment, channel selection, input switching, and other functions.

By inputting the correct GE universal remote code for your specific Haier TV model, you can synchronize the remote with your TV, allowing you to operate the TV using the remote control. 

It’s important to note that different Haier TV models may require different remote codes, so it’s essential to find the appropriate code for your particular TV model. We’ve provided a list of GE universal remote codes for Haier TVs below in this blog post.

List of GE universal remote codes for Haier TV

3 digit codes

• 081, 216, 217, 157

4 digit CL6 codes

• 6151, 6171, 5321, 6141, 0921, 1161, 2141, 0671, 0861, 2891, 1741, 3831, 4851, 1221

4 digit CL5 codes

• 6151, 6171, 5321, 6141, 0921, 1161, 2141, 0671, 0861, 2891, 1741, 3831, 4851, 1221

4 digit CL4 codes

• 6151, 1221, 6171, 6141, 5321, 0921, 1161, 2141, 2891, 0671, 1741, 0861, 3831, 4851

4 digit CL3 codes

• 1221, 0921, 5321, 2891, 0671, 1161, 0861, 2141, 1741, 3831, 4851

4 digit V5 codes

• 0671, 2891, 1741, 0861, 0921, 3831, 4851

4 digit V4 codes

• 0671, 2891, 1741, 0861, 0921, 3831, 4851

4 digit V3 codes

• 5078, 5139, 5120, 5307, 5380, 5409, 5432

4 digit V2 codes

• 5078, 5139, 5120, 5307, 5380, 5409, 5432

4 digit V1 codes

• 0081, 0216, 0217, 0157, 1147, 0935

How to program a GE universal remote control with a Haier TV with codes

Your GE universal remote control contains thousands of device codes for the latest audio and video equipment. 

So you would need to locate the code listed for your specific device that came with your remote control. We’ve listed GE universal remote control codes for Haier TVs above in this post.

Programming a GE Universal Remote with codes using Direct Code Entry

The “Direct Code Entry” technique is useful for those who are familiar with the device’s codes and want to program a GE universal remote control with it. 

Check the GE universal remote codes for your Haier TV listed above, then use these detailed instructions to program it.

• Step 1: Find the code list (CL3, CL4, CL5, or CL6) for the TV.
• Step 2: Manually switch on the TV and turn off any other devices placed near it.
• Step 3: Press and hold down the “Setup Button” until the red light on the remote control turns on and remains on.
• Step 4: Once the red LED is on, release the “Setup Button.”
• Step 5: Press and release the TV button.
• Step 6: After pressing the TV button, the red light on the remote will blink once and remain on.
• Step 7: Next, use the number buttons on the remote to enter the first four digit remote control codes for your device.
• Step 8: Test the device to see if the GE remote is fully functional and that the TV responds properly.
• Step 9: If the remote’s buttons don’t operate the device, return to “Step 3” above and try again using the next code for that device.

What should I do if none of the GE remote codes work with my Haier TV?

If the codes above don’t work with your Haier TV, there’s another method to program your Ge universal remote control with the TV. 

It is called the Auto Code search method. Don’t worry, it’s rather simple, and we have explained the step by step process below.

How to Program a General Electric Universal Remote with a Haier TV Without Codes

For those who don’t know the universal remote codes of their Haier TV or who can’t find the right code, the “Auto Code Search” method is practical. 

Below are the step-by-step instructions for programming your GE universal remote without knowing its codes.

Programming a GE Universal Remote to a Haier TV without codes using the Auto Code Search method

• Step 1: Manually switch on the TV and turn off any other devices placed near it.
• Step 2: Press and hold the “Setup Button” until the red indicator light turns on.
• Step 3: Once the red indicator light turns on, release the “Setup Button.”
• Step 4: To program a TV, press and release the TV button.
• Step 5: After pressing the button for the device you wish to control, the red light on the remote will blink once and remain on.
• Step 6: Point your remote at the device, then press and release the power button to start the code search.
• Step 7: The red indicator light will start flashing while it searches.
• Step 8: If a compatible code is found, your device will turn off, and the red indicator light on the GE remote control will stop flashing and remain on.
• Step 9: If the red LED indicator stops flashing without your TV turning off, simply repeat the process from “Step 4” above.
• Step 10: Once your device turns off, manually turn it back on.
• Step 11: Point your General Electric universal remote at the device again and press and release the Volume Up Button.
• Step 12: After pressing the “Volume Up Button,” the red indicator light will blink once and remain on.
• Step 13: At this stage, if a compatible code is found, your device should turn off again.
• Step 14: If the device doesn’t turn off after pressing the “Volume Up Button,” simply continue to press and release the volume up button.
• Step 15: Once your device turns off, that means your remote now has the compatible code.
• Step 16: To store this code in your remote, simply press the same device button that you pressed in “Step 4” above. In this example, we will press the TV button since we are programming the remote control with a TV.
• Step 17: Now turn on your device using the GE remote and test all its buttons to make sure your remote is fully functional with this device.
• Step 18: If the GE remote is not fully functional with your device, simply return to “Step 2” to repeat the process and find a better code.

How do I find the code for my Haier TV?

You may check the list of codes listed above in this post or visit this link to check more codes if the ones here don’t work.

Why is my GE universal remote not working with my Haier TV?

There are a few reasons why your GE universal remote might not be working with your Sceptre TV.

The remote is not in the correct mode

Make sure that the remote is in the correct mode for your TV. To do this, press and hold the mode button on the remote until the indicator light changes color. The indicator light will flash a different color for each mode.

The remote is not programmed correctly

If you have programmed the remote correctly and it is still not working, try using the auto code search feature as explained above. 

The remote is not compatible with your TV

Some GE universal remotes are not compatible with all TVs. If you have tried all of the above and the remote is still not working, it is possible that your remote is not compatible with your TV. 

In this case, you will need to purchase a different universal remote that is compatible with your TV.

Here are some additional tips for troubleshooting your GE universal remote:

• Make sure that the batteries in the remote are fresh.
• Try pointing the remote directly at the TV.
• Make sure that there are no obstacles between the remote and the TV.
• Try moving the remote closer to the TV.
• Try changing the batteries in the remote.
• Try programming the remote again.
• If you are still having trouble, contact the GE customer service department for assistance.
• Try resetting the remote.

Conclusion

In conclusion, programming your GE universal remote control with your Haier TV is a straightforward process that can greatly enhance your TV viewing experience. 

By following the provided codes and setup instructions, you can easily synchronize your remote with your TV and gain control over its various functions.

We have provided a comprehensive list of GE universal remote codes specifically designed for Haier TVs, catering to different model variations. 

Whether you prefer the direct code entry method or the convenient auto code search method, you can find step-by-step instructions in this blog post to guide you through the setup process.

In the event that the listed codes do not work with your Haier TV, we have also covered troubleshooting tips to help you identify and resolve any issues. 

Remember to ensure that your remote is in the correct mode, properly programmed, and compatible with your TV.

If you encounter any difficulties or require further assistance, don’t hesitate to reach out to the GE customer service department for additional support. They will be able to provide specific guidance tailored to your needs.

Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases