GE universal remote codes for Legend TV And programming guide

Are you drowning in a sea of remotes, desperately searching for the right one to control your Legend TV? 

It’s time to put an end to the madness and streamline your entertainment system with a GE universal remote control. 

But, what happens when your trusty GE remote refuses to cooperate with your Legend TV? Fear not, dear reader, for we have the solution you seek. 

In this blog post, we’ll take you on a journey to uncover the elusive GE universal remote codes for your Legend TV, giving you the power to seamlessly navigate through your favorite shows and movies with a single push of a button. Get ready to embark on a quest for the ultimate entertainment experience!

Does the GE universal remote work with the Legend TV?

Yes, the GE universal remote is capable of working with Legend TVs. However, it is important to note that not all GE universal remotes are compatible with all models of Legend TVs. 

The specific codes required to program the remote to work with a Legend TV may vary depending on the model of the TV and the version of the remote. 

We have provided a list of GE universal remote codes in this blog post for the Legend TV brand. 

It’s also worth noting that some GE universal remotes may require that you use the auto code setup method in order to pair it with a Legend TV.

What are GE universal remote codes for a Legend TV?

GE universal remote codes for Legend TV refer to a set of specific numeric codes that can be programmed into a GE universal remote control in order to control a Legend TV. 

Each brand and model of TV has a unique code that must be entered into the remote control for it to work with that TV. 

These codes enable the remote to send the appropriate signals to the TV to perform functions such as changing channels, adjusting the volume, or turning the TV on and off. 

Once the correct code is entered into the remote, it will be able to control the TV just as if it were the original remote control that came with the TV. Below are the various GE universal remote codes for Legend TVs.

Legend TV codes for GE universal remotes

4 digit GE universal remote CL6 codes for Legend TV

• 1891, 0581

4 digit GE universal remote CL5 codes for Legend TV

• 1891, 0581

4 digit GE universal remote CL4 codes for Legend TV

• 1891, 0581

4 digit GE universal remote CL3 codes for Legend TV

• 1891, 0581

4 digit GE universal remote V5 codes for Legend TV

• 0581

4 digit GE universal remote V4 codes for Legend TV

• 5238

4 digit GE universal remote V3 codes for Legend TV

• 0581

4 digit GE universal remote V2 codes for Legend TV

• 5238

4 digit GE universal remote V1 codes for Legend TV

• 0116

3 digit GE universal remote V1 codes for Legend TV

• 116

How to program a GE universal remote control with a Legend TV with codes

Your GE universal remote control contains thousands of device codes for the latest audio and video equipment. 

So you would need to locate the code listed for your specific device that came with your remote control. We’ve listed GE universal remote control codes for Legend TVs above in this post.

Programming a GE Universal Remote with codes using Direct Code Entry

The “Direct Code Entry” technique is useful for those who are familiar with the device’s codes and want to program a GE universal remote control with it. 

Check the GE universal remote codes for your Legend TV listed above, then use these detailed instructions to program it.

• Step 1: Find the code list (CL3, CL4, CL5, or CL6) for the TV.
• Step 2: Manually switch on the TV and turn off any other devices placed near it.
• Step 3: Press and hold down the “Setup Button” until the red light on the remote control turns on and remains on.
• Step 4: Once the red LED is on, release the “Setup Button.”
• Step 5: Press and release the TV button.
• Step 6: After pressing the TV button, the red light on the remote will blink once and remain on.
• Step 7: Next, use the number buttons on the remote to enter the first four digit remote control codes for your device.
• Step 8: Test the device to see if the GE remote is fully functional and that the TV responds properly.
• Step 9: If the remote’s buttons don’t operate the device, return to “Step 3” above and try again using the next code for that device.

What should I do if none of the codes I try work with my Legend TV and GE universal remote?

If the codes above don’t work with your Legend TV, there’s another method to program your Ge universal remote control with the TV. 

It is called the Auto Code search method. Don’t worry, it’s rather simple, and we have explained the step by step process below.

How to Program a General Electric Universal Remote with a Legend TV Without Codes

For those who don’t know the universal remote codes of their Legend TV or who can’t find the right code, the “Auto Code Search” method is practical. 

Below are the step-by-step instructions for programming your GE universal remote without knowing its codes.

Programming a GE Universal Remote to a Legend TV without codes using the Auto Code Search method

• Step 1: Manually switch on the TV and turn off any other devices placed near it.
• Step 2: Press and hold the “Setup Button” until the red indicator light turns on.
• Step 3: Once the red indicator light turns on, release the “Setup Button.”
• Step 4: To program a TV, press and release the TV button.
• Step 5: After pressing the button for the device you wish to control, the red light on the remote will blink once and remain on.
• Step 6: Point your remote at the device, then press and release the power button to start the code search.
• Step 7: The red indicator light will start flashing while it searches.
• Step 8: If a compatible code is found, your device will turn off, and the red indicator light on the GE remote control will stop flashing and remain on.
• Step 9: If the red LED indicator stops flashing without your TV turning off, simply repeat the process from “Step 4” above.
• Step 10: Once your device turns off, manually turn it back on.
• Step 11: Point your General Electric universal remote at the device again and press and release the Volume Up Button.
• Step 12: After pressing the “Volume Up Button,” the red indicator light will blink once and remain on.
• Step 13: At this stage, if a compatible code is found, your device should turn off again.
• Step 14: If the device doesn’t turn off after pressing the “Volume Up Button,” simply continue to press and release the volume up button.
• Step 15: Once your device turns off, that means your remote now has the compatible code.
• Step 16: To store this code in your remote, simply press the same device button that you pressed in “Step 4” above. In this example, we will press the TV button since we are programming the remote control with a TV.
• Step 17: Now turn on your device using the GE remote and test all its buttons to make sure your remote is fully functional with this device.
• Step 18: If the GE remote is not fully functional with your device, simply return to “Step 2” to repeat the process and find a better code.

How do I find the code for my Legend TV?

You may check the list of codes listed above in this post or visit this link to check more codes if the ones here don’t work.

Why is my GE universal remote not working with my Legend TV?

There are a few reasons why your GE universal remote might not be working with your Sceptre TV.

The remote is not in the correct mode

Make sure that the remote is in the correct mode for your TV. To do this, press and hold the mode button on the remote until the indicator light changes color. The indicator light will flash a different color for each mode.

The remote is not programmed correctly

If you have programmed the remote correctly and it is still not working, try using the auto code search feature as explained above. 

The remote is not compatible with your TV

Some GE universal remotes are not compatible with all TVs. If you have tried all of the above and the remote is still not working, it is possible that your remote is not compatible with your TV. 

In this case, you will need to purchase a different universal remote that is compatible with your TV.

Here are some additional tips for troubleshooting your GE universal remote:

• Make sure that the batteries in the remote are fresh.
• Try pointing the remote directly at the TV.
• Make sure that there are no obstacles between the remote and the TV.
• Try moving the remote closer to the TV.
• Try changing the batteries in the remote.
• Try programming the remote again.
• If you are still having trouble, contact the GE customer service department for assistance.
• Try resetting the remote.

Consult the manufacturer’s website: If you are still having trouble finding GE universal remote codes for your Legend TV, check the manufacturer’s website for additional support and troubleshooting resources.

Conclusion

In conclusion, the GE universal remote is capable of working with Legend TVs, although not all GE universal remotes are compatible with all models of Legend TVs. 

The specific codes required to program the remote to work with a Legend TV may vary depending on the model of the TV and the version of the remote. 

However, this article provides a list of GE universal remote codes for the Legend TV brand. 

If the codes provided do not work, the article also outlines the Auto Code search method to program the GE universal remote to the Legend TV without knowing its codes. 

With these solutions, users can successfully program a GE universal remote control with their Legend TV and enjoy a seamless entertainment experience.

Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases