If you own a Philips DVD player and seek to streamline your remote control experience, you’re in the right place.
In this comprehensive guide, we unveil the secret codes and provide step-by-step instructions to program your RCA Universal Remote for flawless interaction with your Philips DVD player.
List of RCA universal remote codes for Philips DVD Players
5 digit V1 codes
- 32084, 32434, 30503, 30539, 32056, 30646, 30675, 31267, 31340, 31354, 31506, 32526
4 digit V4 codes
- 0503, 0539, 2056, 0646, 0675, 0854, 1260, 1267, 1340, 1354, 2084, 2334, 2434, 1506
4 digit V3 codes
- 3151, 3157, 3162, 3354, 3355, 3365, 3414, 3417, 3430, 3445, 3448, 3451, 3453, 3481
4 digit V2 codes
- 3162, 3167, 3255, 3263, 3280, 3289, 3290, 3313
4 digit V1 codes
- 3162, 3258, 3356, 3357, 3383, 3389, 3423, 3424, 3441, 3442, 3479, 3480, 3483, 3484, 3486, 3488, 3489, 3490, 3491, 3497, 3498, 3504, 3531, 3607, 3612
3 digit V3 codes
- 057, 074, 078, 086, 102, 125
3 digit V1 codes
- 162, 258, 356, 357, 358, 389, 504
How to program an RCA universal remote to a DVD player by Direct Code Entry
In the Direct Code Entry method, you enter a code from the list of codes provided by the manufacturer of your device. It might be the quickest way to program an RCA universal remote for a DVD player.
- Step 1: Manually turn on your DVD player.
- Step 2: Use the list of RCA universal remote codes provided below to find the codes for your DVD player.
- Step 3: Once found, write them down and keep them nearby.
- Step 4: Keep the remote pointed at the IR sensor of your DVD player.
- Step 5: Press and hold the “DVD-Blu Ray key” for about five seconds, until the Power button lights up. Don’t let go of the DVD-Blu Ray key.
- Step 6: While still holding down the DVD-Blu Ray key, use your other hand to enter the first code for your DVD player from the code list below.
- Step 7: The codes can be 2, 3, 4, or 5 digits, depending on the universal remote control version.
- Step 8: When you’ve finished entering the code, keep holding down the DVD-Blu Ray key while looking at the Power Button.
- Step 9: If the Power Button LED is still on and not flashing, then you’re done! You’ve programmed your RCA universal remote control for your DVD player.
- Step 10: At that point, you can let go of the DVD button and begin testing your RCA remote’s various DVD player control features.
- Step 11: Occasionally, not all of the DVD player’s functions may be compatible with the remote. In that case, you have to reprogram the RCA universal remote with a different code for your DVD player.
- Step 12: If the Power Button light blinks four times and turns off, that means you entered the wrong code.
- Step 13: If the code you entered was wrong, then continue holding the DVD button and re-enter another code.
- Step 14: Repeat this process until you find the correct code for your DVD that enables all its functions.
How to program an RCA universal remote to a DVD player by Auto Code Search
The Auto Code Search function automatically scans through all the codes related to the device you aim to control.
Once you come across the code that operates your device, you may terminate the search and save the code.
- Step 1: Manually turn on your DVD player.
- Step 2: Point the RCA universal remote control to the DVD player.
- Step 3: Press and hold the DVD-Blu Ray button first with one hand.
- Step 4: While still holding the DVD-Blu Ray button, press and hold the Power button with another hand until the power button lights up.
- Step 5: After the Power button lights up, release both buttons.
- Step 6: Press and hold the Play button for about five seconds until your DVD player turns on.
- Step 7: If your DVD does not turn on after five seconds, keep pressing and holding the Play button and releasing it every five seconds until it does.
- Step 8: As soon as your DVD player turns on, let go of the Play button.
- Step 9: Now press the rewind button (or reverse button) once every five seconds until your DVD player turns off.
- Step 10: As soon as your DVD player turns off, release the Rewind button.
- Step 11: Finally, press the Stop button to save this code to your RCA universal remote control.
Sometimes, despite following the programming instructions carefully, the RCA universal remote may not work as expected. Here are a few troubleshooting tips to help you resolve common issues:
Double-check the Code:
Ensure that you have entered the correct code for your Philips DVD. Mistyping or using the wrong code can prevent the remote from functioning correctly.
Distance and Line of Sight:
Make sure you are within a reasonable distance from the DVD and that there are no obstacles blocking the line of sight between the remote and the DVD. Interference or obstructions can hinder the remote’s signals.
If the remote is not responding at all, it’s possible that the batteries are drained. Replace the batteries with fresh ones and try programming the remote again.
Reset and Reprogram:
If you have tried multiple codes and none of them work, you can reset the remote to its factory settings and start the programming process from scratch. Refer to the remote’s manual for instructions on how to reset it.
Frequently asked questions
Can I use an RCA universal remote with other DVD brands?
Yes, RCA universal remotes are designed to work with various DVD brands. You can follow similar steps to find the codes for other DVD brands and program your remote accordingly.
What if none of the Philips DVD codes work for my RCA universal remote?
If the provided codes don’t work for your specific Philips DVD model, you can try using the trial-and-error method or contact RCA customer support for assistance.
Can I program my RCA remote to control other devices, such as a DVD player or soundbar?
Absolutely! RCA universal remotes can be programmed to control a wide range of devices, including DVD players, soundbars, gaming consoles, and more.
Refer to the remote’s manual or online resources for the specific codes and programming instructions.
Do I need to reprogram the RCA remote if I replace the batteries?
The programmed codes should remain intact for at least five to ten minutes after the batteries stop working or have been removed, giving you enough time to replace them.
Can I use the RCA universal remote for multiple Philips DVD players in different rooms?
Yes, you can use the same RCA universal remote to control multiple Philips DVD players as long as they are within the remote’s range. However, you may need to program the remote separately for each DVD.
In conclusion, mastering the art of programming your RCA Universal Remote for seamless control of your Philips DVD player has never been easier.
This guide has equipped you with a comprehensive list of codes and clear, step-by-step instructions for both the Direct Code Entry and Auto Code Search methods.
Whether you’re a tech-savvy enthusiast or a casual user, these methods offer you the flexibility to choose the one that suits your preference.
Remember that while the provided codes cover a wide range of scenarios, occasional incompatibilities might arise.
If a specific code doesn’t unlock all the functions you desire, don’t be discouraged. With persistence and a trial-and-error approach, you can conquer any compatibility challenge.
Should you encounter any hiccups along the way, the troubleshooting tips provided offer practical solutions to the most common issues.
From double-checking codes to ensuring a clear line of sight, these suggestions empower you to troubleshoot with confidence.
Moreover, the versatility of RCA universal remotes goes beyond just DVD players, enabling you to control an array of devices with ease.
As technology evolves, your RCA remote can evolve with it, adapting to new gadgets you introduce to your entertainment setup.
With the insights and knowledge gained from this guide, you’re now ready to take charge and optimize your remote control experience.
Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases