In this guide, we’ll unveil the secret codes and provide you with a step-by-step programming walk through, empowering you to effortlessly program your RCA universal remote with your Toshiba DVD player.
List of RCA universal remote codes for Toshiba DVD Players
5 digit V1 codes
- 31769, 30503, 32705, 31154, 32006, 32277, 33157, 30695, 33857
4 digit V4 codes
- 0503, 0695, 1045, 1154, 1503, 1510, 1588, 1769, 1854, 2277, 3157, 2006, 2705
4 digit V3 codes
- 3160, 3161, 3351, 3404, 3421, 3429, 3456, 3478, 3479, 3484, 3487, 3488, 3489
4 digit V2 codes
- 3162, 3252, 3258, 3265, 3266, 3303, 3304, 3332
4 digit V1 codes
- 3162, 3167, 3169, 3274, 3307, 3309, 3362, 3363, 3381, 3406, 3407, 3420, 3426, 3494, 3527, 3528, 3611, 3600
3 digit V3 codes
- 072, 080, 101, 107
3 digit V1 codes
- 162, 167, 362, 363, 405, 406, 407, 603
How to program an RCA universal remote to a DVD player by Direct Code Entry
In the Direct Code Entry method, you enter a code from the list of codes provided by the manufacturer of your device. It might be the quickest way to program an RCA universal remote for a DVD player.
- Step 1: Manually turn on your DVD player.
- Step 2: Use the list of RCA universal remote codes provided below to find the codes for your DVD player.
- Step 3: Once found, write them down and keep them nearby.
- Step 4: Keep the remote pointed at the IR sensor of your DVD player.
- Step 5: Press and hold the “DVD-Blu Ray key” for about five seconds, until the Power button lights up. Don’t let go of the DVD-Blu Ray key.
- Step 6: While still holding down the DVD-Blu Ray key, use your other hand to enter the first code for your DVD player from the code list below.
- Step 7: The codes can be 2, 3, 4, or 5 digits, depending on the universal remote control version.
- Step 8: When you’ve finished entering the code, keep holding down the DVD-Blu Ray key while looking at the Power Button.
- Step 9: If the Power Button LED is still on and not flashing, then you’re done! You’ve programmed your RCA universal remote control for your DVD player.
- Step 10: At that point, you can let go of the DVD button and begin testing your RCA remote’s various DVD player control features.
- Step 11: Occasionally, not all of the DVD player’s functions may be compatible with the remote. In that case, you have to reprogram the RCA universal remote with a different code for your DVD player.
- Step 12: If the Power Button light blinks four times and turns off, that means you entered the wrong code.
- Step 13: If the code you entered was wrong, then continue holding the DVD button and re-enter another code.
- Step 14: Repeat this process until you find the correct code for your DVD that enables all its functions.
How to program an RCA universal remote to a DVD player by Auto Code Search
You can program an RCA universal remote for a DVD without using a code through the Auto Programming method.
The Auto Code Search function automatically scans through all the codes related to the device you aim to control.
Once you come across the code that operates your device, you may terminate the search and save the code.
- Step 1: Manually turn on your DVD player.
- Step 2: Point the RCA universal remote control to the DVD player.
- Step 3: Press and hold the DVD-Blu Ray button first with one hand.
- Step 4: While still holding the DVD-Blu Ray button, press and hold the Power button with another hand until the power button lights up.
- Step 5: After the Power button lights up, release both buttons.
- Step 6: Press and hold the Play button for about five seconds until your DVD player turns on.
- Step 7: If your DVD does not turn on after five seconds, keep pressing and holding the Play button and releasing it every five seconds until it does.
- Step 8: As soon as your DVD player turns on, let go of the Play button.
- Step 9: Now press the rewind button (or reverse button) once every five seconds until your DVD player turns off.
- Step 10: As soon as your DVD player turns off, release the Rewind button.
- Step 11: Finally, press the Stop button to save this code to your RCA universal remote control.
Troubleshooting Tips
Sometimes, despite following the programming instructions carefully, the RCA universal remote may not work as expected. Here are a few troubleshooting tips to help you resolve common issues:
Double-check the Code:
Ensure that you have entered the correct code for your Toshiba DVD. Mistyping or using the wrong code can prevent the remote from functioning correctly.
Distance and Line of Sight:
Make sure you are within a reasonable distance from the DVD and that there are no obstacles blocking the line of sight between the remote and the DVD. Interference or obstructions can hinder the remote’s signals.
Battery Replacement:
If the remote is not responding at all, it’s possible that the batteries are drained. Replace the batteries with fresh ones and try programming the remote again.
Reset and Reprogram:
If you have tried multiple codes and none of them work, you can reset the remote to its factory settings and start the programming process from scratch. Refer to the remote’s manual for instructions on how to reset it.
Frequently asked questions
Can I use an RCA universal remote with other DVD brands?
Yes, RCA universal remotes are designed to work with various DVD brands. You can follow similar steps to find the codes for other DVD brands and program your remote accordingly.
What if none of the Toshiba DVD codes work for my RCA universal remote?
If the provided codes don’t work for your specific Toshiba DVD model, you can try using the trial-and-error method or contact RCA customer support for assistance.
Can I program my RCA remote to control other devices, such as a DVD player or soundbar?
Absolutely! RCA universal remotes can be programmed to control a wide range of devices, including DVD players, soundbars, gaming consoles, and more.
Refer to the remote’s manual or online resources for the specific codes and programming instructions.
Do I need to reprogram the RCA remote if I replace the batteries?
The programmed codes should remain intact for at least five to ten minutes after the batteries stop working or have been removed, giving you enough time to replace them.
Can I use the RCA universal remote for multiple Toshiba DVD players in different rooms?
Yes, you can use the same RCA universal remote to control multiple Toshiba DVD players as long as they are within the remote’s range. However, you may need to program the remote separately for each DVD.
Conclusion
Congratulations! You’ve successfully programmed your RCA universal remote and Toshiba DVD player.
Armed with the comprehensive list of programming codes and the step-by-step programming guide, you’re well-equipped to take charge of your entertainment experience like never before.
Whether you opt for the Direct Code Entry method or the Auto Code Search function, you’re in command.
And remember, troubleshooting is part of the journey. If you encounter any hiccups along the way, our troubleshooting tips are here to guide you back on track.
With your newly programmed RCA universal remote, your Toshiba DVD player bows to your command at the touch of a button.
Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases
