Skip to content

Spectrum remote codes for Samsung TV and programming guide

If you’ve been struggling to set up your Spectrum remote with your Samsung TV, then you’ve come to the right spot. In this blog post, I have compiled a list of codes and a programming guide that you can use to set up your Spectrum remote with your Samsung TV.

Spectrum remote codes for Samsung TV

Here’s the list of Spectrum universal remote codes for your Samsung TV. Note that each spectrum remote has different codes. To find the exact code list for your specific spectrum remote mode, open the battery cover and look for its model number inside the battery compartment.

find the spectrum remote model number in the battery compartment
Find your spectrum remote model number
Spectrum Remote modelSpectrum codes for Samsung TV
URC 20600060, 0178, 0030, 0587, 0766
UR3-SR3M/UR3-SR3S192, 089, 004, 101, 127, 133, 160, 105, 070, 184, 185, 515, 655,
1060BC2/1060BC310060, 10702, 10178, 10650, 10766, 10814, 11060, 11903, 12051
Universal CLIKR-5: UR5U-8780L / 8790L258, 050, 363, 143, 333, 228, 229, 515, 655
Spectrum Guide Remote12051, 13993, 10060, 11959, 10766, 11480, 10814, 10178
Atlas OCAP 5/M10560060, 0812, 0702, 0178, 0030, 1903, 1575, 1395, 1312, 1060, 0814, 0766, 0427, 0408, 0329, 0056, 0032, 0019
AllTouch AT8560-Rev-A1004, 1005, 1006, 1010, 1013, 1017, 1086, 1087, 1088, 1137, 1305, 1138, 1156, 1178, 1232, 1275, 1276, 1277, 1281, 1282, 1287, 1311, 1312, 1332, 1353
UR3-SR / SR2004, 101, 127, 133, 143, 160, 089, 105, 070, 184, 185, 192
Universal CLIKR-5: UR5U-8820L258, 050, 089, 101, 105, 127, 143, 160, 228, 229, 363
Universal Easy Clicker UR2L-R803004, 101, 127, 133, 160, 089, 105, 070, 237, 239, 184, 185, 192, 461, 578, 655
Universal Electronics Atlas 5 DVR/PVR0030, 0178, 0766, 0056, 0019, 0702, 0032
UR5 8400004, 101, 127, 133, 143, 160, 089, 105, 217, 218, 221
Universal UR5-8400A004, 101, 127, 133, 143, 160, 089, 105, 217, 218, 221
Universal: M2067BX310060, 10812, 10702, 10178, 10030, 10766, 10814, 11060, 11903
Synergy V: RT-U64CP015, 016, 017, 023, 031, 090, 107, 108, 134, 147, 151, 153, 386, 411
Universal CLIKR-5: UR5U-8720L258, 050, 089, 105, 363, 127, 143, 333, 228, 229
UR4U-MDVR-CHD2258, 050, 089, 105, 228, 229, 363, 333
URC 24642051, 1959, 0178, 0812
DTA HDA-IR20021, 0061, 0081, 0101, 0121, 0171, 0231, 0281, 0341, 0371, 0471, 0801, 2881, 1041, 1061, 1131, 1281, 1371, 1741, 2051, 2111, 2221, 2641, 2661, 2671, 3241, 3341, 3371, 3771, 0411, 3601, 3631, 3661, 3691, 3721, 3831, 1231, 1501, 1751, 1801, 0901, 1311, 2291, 1691
DTA HDA-RF2.20121, 0281, 1281, 0041, 2671, 4021, 4131, 4141, 4151, 4161, 4171, 4181, 4191, 0021, 0061, 0081, 0101, 0171, 0231, 0341, 0371, 0471, 0801, 0861, 1061, 1371, 2641, 1501, 0411, 3661, 3821, 3841, 3861, 5021
UR2-DTA-TWC2192, 184, 185, 004, 101, 127, 133, 160, 089, 105, 070, 237, 239, 461, 578, 655
UR2-RF-CHD192, 101, 655, 089, 105, 133, 184, 185
URC 2068/20690178, 0766, 0814, 1060, 2051
Delta-3068 Digital Adapter10812, 10060, 10702, 10178, 10030, 11959, 11632, 11575, 11060, 10814, 10766, 10587, 10482, 10427, 10408, 10329, 10217, 10056, 10032, 10019
Spectrum remote codes for Samsung TV

How to program a Spectrum Universal Remote by direct code entry

Now that you have the codes to program a Spectrum universal remote to a Samsung TV, here’s how to program it. Note that each of the spectrum remote models listed above has a slightly different programming method. So I’ll describe each of their programming processes accordingly

Spectrum URC 2060 direct code entry programming

  • Press the TV POWER key.
  • Press and hold SETUP until the LED blinks twice.
  • Use the table above to search for codes assigned to your Samsung TV.
  • Enter the first TV code for your brand from your list of codes.
  • Press the TV POWER key to test TV control. If the TV turns off, setup is complete.
  • If the TV does not turn off, repeat this process using the next code for your TV brand.

Spectrum UR3-SR3M/UR3-SR3S direct code entry programming

  • Turn on the device your TV
  • Use the table above to search for codes assigned to your Samsung TV
  • Press the device button and the OK/SEL button simultaneously for three seconds.
  • The device will turn on for 20 seconds. 
  • Point the remote toward the TV and enter one of the three-digit codes listed in the table above.
  • Try one code at a time until your TV turns off.
  • To make sure you’ve entered the correct code, press the MUTE button. 
  • The device should turn off.
  • To store the three-digit code, press the TV button once. 
  • The TV button LED will blink twice.
  • Test out the remote buttons (mute, volume, etc.). If the buttons don’t work as they should, repeat step #3 using the next three-digit code from the brand list.

Spectrum 1060BC2/1060BC3 direct code entry programming

  • Turn on your TV.
  • Use the table above to search for codes assigned to your Samsung TV
  • On the remote control, press the TV button once.
  • Press and hold the SETUP button until the TV mode key blinks twice.
  • Enter one of the five-digit codes from the table above for your device. The TV mode key will blink twice.
  • If the TV mode key emits a long blink, repeat steps 3–5 and try entering the same code again.
  • Aim the remote control at the TV and press Power (or Play) once. The device should turn off. 
  • If the device doesn’t turn off, repeat steps 2-5, until you find a code that works.

Spectrum Universal CLIKR-5: UR5U-8780L / 8790L direct code entry programming

  • Turn on the TV.
  • On your remote, press the TV button and the OK/SEL buttons simultaneously for three seconds. 
  • The TV button LED will light up, indicating that it is ready to be programmed.
  • The TV button LED will remain on for 30 seconds, and the next step must be completed while it is on.
  • Point the remote at your TV and enter a code for the Samsung TV as shown in the table above.
  • Try one code at a time until your Samsung TV turns off.
  • Pause for one second between entering each number of the code.
  • Verify that the correct code has been selected by pressing the power button.
  • Your TV should turn back on. 
  • If it does, try changing the channel to verify programming was successful.
  • Finally, press the TV button to store the code. 
  • The TV button LED will blink twice to confirm the code has been stored.

Spectrum Guide Remote direct code entry programming

  • Turn on the Samsung TV
  • Simultaneously press and hold the “MENU” and “OK” keys on the remote until the “INPUT” key blinks twice.
  • Enter the first code listed in the table above for your TV. 
  • The “INPUT” key will blink twice to confirm.
  • Test the volume and power functions. 
  • If the TV responds as expected, setup is complete. 
  • If not, repeat steps 2-4 using the next code listed for your TV’s brand.

Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases

 Nebaa

Nebaa

I've worked in the tech industry as a sales executive since 2015. Now I create content on the internet. I'm here to share my knowledge and experience.