GE universal remote codes for Dynex TV and setup guide

When it comes to configuring a GE universal remote control for a Dynex TV, you’ll need the corresponding GE universal remote codes.

In this blog post, we’ve provided a list of GE universal remote codes for Dynex TV, along with programming instructions using the Direct Code Entry and Auto Code Search methods.

If none of the codes work, we’ve included troubleshooting tips and additional resources to help you.

What are GE universal remote codes for Dynex TV?

When people refer to “GE universal remote codes for Dynex TV,” they are talking about the programming codes used to configure a GE universal remote control to operate a Dynex TV. 

A universal remote control is designed to work with various devices, including televisions, by inputting specific codes that correspond to the brand and model of the device. 

In this case, the GE universal remote codes for Dynex TV are a set of numerical values that allow the remote control to communicate with and control a Dynex television. 

By entering the correct code for the Dynex TV into the GE universal remote control, you can use the remote to power on/off the TV, adjust the volume, change channels, and perform other functions.

List of GE universal remote codes for Dynex TV

3 digit codes

• 135

4 digit CL6 codes

• 3141, 5311, 3161, 6521, 0371, 2891

4 digit CL5 codes

• 3141, 5311, 3161, 6521, 0371, 2891

4 digit CL4 codes

• 3141, 5311, 3161, 0371, 2891

4 digit CL3 codes

• 3141, 5311, 3161, 0371, 2891

4 digit V5 codes

• 5311, 3141, 3161, 0371, 2891

4 digit V4 codes

• 5421

4 digit V3 codes

• 3141, 3161, 0371, 2891,

4 digit V2 codes

• 5421

4 digit V1 codes

• 1181, 1171, 0135

How to program a GE universal remote control with a Dynex TV with codes

Your GE universal remote control contains thousands of device codes for the latest audio and video equipment. 

So you would need to locate the code listed for your specific device that came with your remote control. We’ve listed GE universal remote control codes for Dynex TVs above in this post.

Programming a GE Universal Remote with codes using Direct Code Entry

The “Direct Code Entry” technique is useful for those who are familiar with the device’s codes and want to program a GE universal remote control with it. 

Check the GE universal remote codes for your Dynex TV listed above, then use these detailed instructions to program it.

• Step 1: Find the code list (CL3, CL4, CL5, or CL6) for the TV.
• Step 2: Manually switch on the TV and turn off any other devices placed near it.
• Step 3: Press and hold down the “Setup Button” until the red light on the remote control turns on and remains on.
• Step 4: Once the red LED is on, release the “Setup Button.”
• Step 5: Press and release the TV button.
• Step 6: After pressing the TV button, the red light on the remote will blink once and remain on.
• Step 7: Next, use the number buttons on the remote to enter the first four digit remote control codes for your device.
• Step 8: Test the device to see if the GE remote is fully functional and that the TV responds properly.
• Step 9: If the remote’s buttons don’t operate the device, return to “Step 3” above and try again using the next code for that device.

GE universal remote Direct Code Entry programming method

What should I do if none of the GE remote codes work with my Dynex TV?

If the codes above don’t work with your Dynex TV, there’s another method to program your Ge universal remote control with the TV. 

It is called the Auto Code search method. Don’t worry, it’s rather simple, and we have explained the step by step process below.

How to Program a General Electric Universal Remote with a Dynex TV Without Codes

For those who don’t know the universal remote codes of their Dynex TV or who can’t find the right code, the “Auto Code Search” method is practical. 

Below are the step-by-step instructions for programming your GE universal remote without knowing its codes.

Programming a GE Universal Remote to a Dynex TV without codes using the Auto Code Search method

• Step 1: Manually switch on the TV and turn off any other devices placed near it.
• Step 2: Press and hold the “Setup Button” until the red indicator light turns on.
• Step 3: Once the red indicator light turns on, release the “Setup Button.”
• Step 4: To program a TV, press and release the TV button.
• Step 5: After pressing the button for the device you wish to control, the red light on the remote will blink once and remain on.
• Step 6: Point your remote at the device, then press and release the power button to start the code search.
• Step 7: The red indicator light will start flashing while it searches.
• Step 8: If a compatible code is found, your device will turn off, and the red indicator light on the GE remote control will stop flashing and remain on.
• Step 9: If the red LED indicator stops flashing without your TV turning off, simply repeat the process from “Step 4” above.
• Step 10: Once your device turns off, manually turn it back on.
• Step 11: Point your General Electric universal remote at the device again and press and release the Volume Up Button.
• Step 12: After pressing the “Volume Up Button,” the red indicator light will blink once and remain on.
• Step 13: At this stage, if a compatible code is found, your device should turn off again.
• Step 14: If the device doesn’t turn off after pressing the “Volume Up Button,” simply continue to press and release the volume up button.
• Step 15: Once your device turns off, that means your remote now has the compatible code.
• Step 16: To store this code in your remote, simply press the same device button that you pressed in “Step 4” above. In this example, we will press the TV button since we are programming the remote control with a TV.
• Step 17: Now turn on your device using the GE remote and test all its buttons to make sure your remote is fully functional with this device.
• Step 18: If the GE remote is not fully functional with your device, simply return to “Step 2” to repeat the process and find a better code.

GE universal remote Auto Code Search programming method

How do I find the code for my Dynex TV?

You may check the list of codes listed above in this post or visit this link to check more codes if the ones here don’t work.

Why is my GE universal remote not working with my Dynex TV?

There are a few reasons why your GE universal remote might not be working with your Sceptre TV.

The remote is not in the correct mode

Make sure that the remote is in the correct mode for your TV. To do this, press and hold the mode button on the remote until the indicator light changes color. The indicator light will flash a different color for each mode.

The remote is not programmed correctly

If you have programmed the remote correctly and it is still not working, try using the auto code search feature as explained above. 

The remote is not compatible with your TV

Some GE universal remotes are not compatible with all TVs. If you have tried all of the above and the remote is still not working, it is possible that your remote is not compatible with your TV. 

In this case, you will need to purchase a different universal remote that is compatible with your TV.

Here are some additional tips for troubleshooting your GE universal remote:

• Make sure that the batteries in the remote are fresh.
• Try pointing the remote directly at the TV.
• Make sure that there are no obstacles between the remote and the TV.
• Try moving the remote closer to the TV.
• Try changing the batteries in the remote.
• Try programming the remote again.
• If you are still having trouble, contact the GE customer service department for assistance.
• Try resetting the remote.

Conclusion

In conclusion, programming a GE universal remote control for your Dynex TV is a straightforward process. 

By using the provided GE universal remote codes and following the programming instructions, you can easily configure your remote to control your Dynex TV. 

Whether you choose the Direct Code Entry or Auto Code Search method, these step-by-step instructions will help you set up your remote and ensure its compatibility with your TV. 

However, if you encounter any issues, we’ve offered troubleshooting tips and recommended reaching out to GE customer service for further assistance. Enjoy the convenience of controlling your Dynex TV with a GE universal remote!

Disclaimer: As An Amazon Affiliate, We Earn From Qualifying Purchases